EF-0926-20
The 926 filter is a compact, single phase, high current device with very good common mode and differential mode insertion loss. It is useful in power control sections where the ground coil will help eliminate system ground loop noise. The package features the 16 amp IEC connector which facilitates the use of a detachable cord set. The "thru" bulkhead mounting provides the ultimate in RF noise suppression. Other configurations are also available.
Operating Voltage = 115 / 250 V~ Operating Current = 20 A / 115 V~, 16 A / 250 V~ Operating Frequency = 50 / 60 Hz Temperature Range = -20 To 50 Deg. C Diel. Withstnd (L -Case) = 1500 V~ For 1 Min. Diel. Withstnd (L -L) = 1500 Vdc For 1 Min. Leakage Current = 1.5Ma At 250 V~, 60 Hz Discharge Volts After 1 Sec = 34 V Max. Ordering Information With Ring Terminals: EF-0926-20 Without Ring Terminals: EF-0926-20S
USA EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 JMK Inc Glasgow G13 1DN Scotland UK
PH: 603 886-4100 FX: 603 886-4115 email: info@jmkfilters.com PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
|
